ANSI/NFPA 260-2003 已装璜家具的部件对香烟烟火的阻燃性
作者:标准资料网 时间:2024-04-30 11:53:01 浏览:9123
来源:标准资料网
【英文标准名称】:CigaretteIgnitionResistanceofComponentsofUpholsteredFurniture
【原文标准名称】:已装璜家具的部件对香烟烟火的阻燃性
【标准号】:ANSI/NFPA260-2003
【标准状态】:作废
【国别】:美国
【发布日期】:2003
【实施或试行日期】:
【发布单位】:美国国家标准学会(ANSI)
【起草单位】:ANSI
【标准类型】:()
【标准水平】:()
【中文主题词】:安全工程;安全要求;耐火性;装饰家具
【英文主题词】:Fireresistance;Safetyengineering;Safetyrequirements;Upholsteredfurniture
【摘要】:Providestheperformanceresultsofupholsteredfurnitureunderconditionsofexposuretoasmolderingcigarette.
【中国标准分类号】:Y80
【国际标准分类号】:13_220_40;97_140
【页数】:
【正文语种】:英语
基本信息
标准名称: | 铅及铅合金化学分析方法 第16部分:铜、银、铋、砷、锑、锡、锌量的测定 光电直读发射光谱法 |
英文名称: | Methods for chemical analysis of lead and lead alloys—Part 16:Determination of copper,silver,bismuth,arsenic,antimony,tin and zinc contents—Optical emission spectrometry |
中标分类: |
冶金 >>
金属化学分析方法 >>
重金属极其合金分析方法 |
ICS分类: |
冶金 >>
有色金属 >>
铅、锌、锡及其合金
|
发布部门: | 中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会 |
发布日期: | 2009-04-08 |
实施日期: | 2010-02-01 |
首发日期: | 2009-04-08 |
作废日期: | |
主管部门: | 中国有色金属工业协会 |
提出单位: | 中国有色金属工业协会 |
归口单位: | 全国有色金属标准化技术委员会 |
起草单位: | 深圳市中金岭南有色金属股份有限公司韶关冶炼厂等 |
起草人: | 师世龙、涂小红、刘莹晶、孔建敏、钟勇 |
出版社: | 中国标准出版社 |
出版日期: | 2009-06-01 |
页数: | 7页 |
计划单号: | 20073471-T-610 |
书号: | 155066·1-37505 |
适用范围
GB/T 4103的本部分规定了铅中的铜、银、铋、砷、锑、锡、锌量的测定方法。
本部分适用于铅中的铜、银、铋、砷、锑、锡、锌量的测定。测定范围见表1。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 冶金 金属化学分析方法 重金属极其合金分析方法 冶金 有色金属 铅 锌 锡及其合金
【英文标准名称】:Cylindricalgears-Codeofinspectionpractice-Part5:Recommendationsrelativetoevaluationofgearmeasuringinstruments
【原文标准名称】:圆柱齿轮.实用检验规则.第5部分:与齿轮测量仪器的评价相关的建议
【标准号】:ISO/TR10064-5-2005
【标准状态】:现行
【国别】:国际
【发布日期】:2005-04
【实施或试行日期】:
【发布单位】:国际标准化组织(IX-ISO)
【起草单位】:ISO/TC60
【标准类型】:()
【标准水平】:()
【中文主题词】:齿轮齿;齿轮传动;试验;正齿轮;测量仪器;齿轮;测量不确定度;评定;校正;测量
【英文主题词】:Calibration;Evaluations;Geardrives;Gearwheels;Measurement;Measuringincertainity;Measuringinstruments;Spurgears;Teethofgears;Testing
【摘要】:ThispartofISO/TR10046providesadditionalinformationandexamplestosupporttheimplementationofISO18653.Itproposesevaluationandcalibrationproceduresforinvolute,helix,pitch,runout,andtooththicknessmeasurementprocesses.Methodsaregivenforevaluationoftheconditionandalignmentsofinstrumentelementssuchascentres,guideways,probesystems,etc.Recommendationsareincludedforestablishmentofaproperenvironmentandforstatisticaldataevaluationprocedures.ItalsocoverstheapplicationofgearartifactstotheestimationofU95measurementprocessuncertainty.Guidanceontheapplicationofmeasurementprocessestotheinspectionofproductgearsisprovided,includingfitnessforuseandtherecommendedlimitsforU95uncertaintybasedupontheaccuracytolerancesofproductgearstobeinspected.Manyofitsrecommendationsmayalsobeapplicabletothemeasurementofworms,wormwheels,bevelgearsandgearcuttingtools.
【中国标准分类号】:J17
【国际标准分类号】:21_200
【页数】:89P.;A4
【正文语种】:英语